clones

Discussion in 'Advanced Cultivation' started by steven420, Apr 10, 2003.

  1. steven420

    steven420 Germinated

    my clones are 3 days of mom. thay r under 80watt floros now.i have two other 80watt floros should i use them to or will 240watts be to much?
     
    steven420, Apr 10, 2003
    #1
    • WANT THE BIGGEST HIT POSSIBLE?? Vaporize! Because of the cool mist nature of vapor that the Vaporbrothers produces you will be able to take bigger hits and hold them longer than with any bong, iced or otherwise. Take the challenge, but do it sitting down! Support GrowKind by buying Vape Pens and Vaporizers from Vaporwarehouse.
  2. chopstick

    chopstick Chilled out

    80wt is fine, I've done it under 60 and had good results. They don't need much light while they root, but once they have rooted, harden them off and get them under some decent light.
     
    chopstick, Apr 10, 2003
    #2
  3. mistical

    mistical Blazed and Confused

    i think ill just go raise my lights
     
    mistical, Apr 10, 2003
    #3
  4. Steve420

    Steve420 Veggy Stage

    When cloning, you can have too much light. Since the plant doesn't really have roots yet, it's water uptake iss very slow. If put a big light on them, they could aspire faster than they can take up water, making them wilt and ide quickly.

    That's why most people use flours; they are not as bright as HIDs and they are cooler, so there won't be as much evaporation as well.
     
    Steve420, Apr 10, 2003
    #4
  5. toolman

    toolman Developed Alternating Nodes

    I'd be most worried about heat on clones .. They will root under any of the lights fluorescent, halides, hps ..Another thing with fluorescents is that if light is too far away the plants have real tendency to be lanky and weak I would recommend keeping the light close as can,,as long as it is not making it hot right next to plant..If the bulb is not hot you can put right just above the plants..
     
    toolman, Apr 10, 2003
    #5

Share This Page